NEWS

2014 11 25

 ECU TOOL v46 released . DENSO ECU TOOL v15 released. ECU wiring diagrams updated. EASYTRONIC ECU TOOL v1 released.   All software and documents can be downloaded from DOWNLOADS page.

2014 11 23

 ECU wiring diagrams updatedMARELLI ECU TOOL v42 released . 9GF ECU now supported. All software and documents can be downloaded from DOWNLOADS page.

2014 10 23

 ECU wiring diagrams updated. SIEMENS ECU TOOL v45 released . DENSO ECU TOOL V13 released. All software and documents can be downloaded from DOWNLOADS page.

2014 09 17

MARELLI ECU TOOL v41 released . IAW59F/IAW5AF – HW303/HW306/HW603/HW607  now supported. Full ST10F168/ST10F269 flash R/W and eeprom 95160 R/W aivalable.  All software and documents can be downloaded from DOWNLOADS page.

2014 09 01

DENSO ECU TOOL v12 released . Improved crc algos and ecus flashing.  All software and documents can be downloaded from DOWNLOADS page.

2014 07 01

DENSO ECU TOOL v11 released .  All software and documents can be downloaded from DOWNLOADS page.

2014 06 14

DENSO ECU TOOL released .  All software and documents can be downloaded from DOWNLOADS page.

2014 05 07

 MAGNETI MARELLI ECU TOOL v39 released .  All software and documents can be downloaded from DOWNLOADS page.

2014 04 07

 MAGNETI MARELLI ECU TOOL v37 released .  All software and documents can be downloaded from DOWNLOADS page.

2014 04 06

 MAGNETI MARELLI ECU TOOL v36 released (tool now supports 5SF3 Kline,CAN full R/W. 5SF8,5SF9 Kline full R/W. IAW5NF ecus eeprom R/W).  ECU wiring diagrams v3 can be downloaded.   All software and documents can be downloaded from DOWNLOADS page.

2014 03 22

Tool update I/O TERMINAL BASIC  software v44 released (MB Siemens VDO MSM2.0 now supported).  FIAT/OPEL MAGNETI MARELLI Tool v34 released (tool now supports 8F3 Kline ecus). MOTORCYCLE ECU TOOL1 V002 released (tool now supports BOMBARDIER M3C ecus). ECU wiring diagrams v2 can be downloaded.   All software and documents can be downloaded from DOWNLOADS page.

2014 02 02

Tool update FIAT BSI SOFTWARE   software V7 released.  All software and documents can be downloaded from DOWNLOADS page

2014 02 01

Tool update I/O TERMINAL BASIC  software v43 released.  All software and documents can be downloaded from DOWNLOADS page

2013 11 16

Tool update I/O TERMINAL BASIC  software v39 released.  All software and documents can be downloaded from DOWNLOADS page

2013 10 04

FIAT/OPEL MAGNETI MARELLI Tool v32 released.  8GMW,8GMF HW502,8GMF HW503 ecus now supported. Corrected 6JO,6JF ecus software. Tool update I/O TERMINAL BASIC  software v35 released. Made some modifications to SID803 ecus softwares.

2013 09 17

FIAT/OPEL MAGNETI MARELLI Tool v30 released.  8GSW ecu now supported. Corrected 8F2 CAN,8F3 CAN odometer change algorithm. Tool update I/O TERMINAL BASIC  software v34 released. DAEWOO SIEMENS/KEMSCO D3 ecu now supported.

2013 08 10

MOTORCYCLE ECU TOOL1 V001 released.Tool Works with I/O TERMINAL HARDWARE. Tool for reading,writing full flash memories  from DUCATI BIKES ECUS made by CONTINENTAL. All operations done by CAN no need to open ECU. ECUS supported CONTINENTAL M3C with freescale 9S12XDP256 mask 1L15Y, CONTINENTAL M3C with freescale 9S12XET256 mask 2M53J.

2013 08 10

FIAT/OPEL MAGNETI MARELLI Tool v29 released. Added ECUS support with SPANSION FLASH memories S29CL016  for FIAT Kline.
DUMP TOOL V2  (improved sid305 odometer correction by dump) released software can be downloaded from download page. Tool can be used by I/O TERMINAL users for free.

2013 07 13

Tool update I/O TERMINAL BASIC  software v33 released. Ford  SID804 mileage correction bug fix made. Software aivalable on downloads page . FIAT/OPEL MAGNETI MARELLI Tool v28 released. Added ECUS support with SPANSION FLASH memories S29CL016

2013 06 14

DUMP TOOL for sid206,sid305 ecus Odometer correction can be downloaded from download page. Tool corrects odometer in eeprom dump. Tool can be used by I/O TERMINAL users for free.

2013 05 19

Tool update FIAT BSI TOOL  software v4 released. Magneti Marelli BSI (70F3633) from Fiat Grand Siena, Palio added.

2013 05 15

Tool update I/O TERMINAL BASIC  software v32 released. Ford SID802,SID804 mileage correction added. Software aivalable on downloads page or you can download here

2013 05 08

Tool update FIAT/OPEL MAGNETI MARELLI Tool v26 released.  Fiat 8GFS ECU now supported.

2013 05 04

FIAT BSI TOOL released. Works with I/O TERMINAL HARDWARE. Tool reads,writes eeprom memories and shows pincode stored in BSI. Tool works by OBD or wired bench. Currently BSIs supported : Magneti Marelli with Freescale MCU 3K91D,1k79X (R/W EEPROM SHOW PIN) . Magneti Marelli with NEC MCU 70F3237,70F3378 (R/W EEPROM SHOW PIN). Siemens Continental Freescale MCU 9S12DG128  (R/W EEPROM SHOW PIN).

2013 04 14

Tool update I/O TERMINAL BASIC  software v30 released.  Software aivalable on downloads page or you can download here

2013 03 27

Tool update FIAT/OPEL MAGNETI MARELLI Tool v25 released.  

2013 03 12

I/O TERMINAL BASIC V2 software V28 is now aivalable on downloads page.   Added Ford SIM24, SIM28, SIM29 ECU support.

2013 03 10

Tool update FIAT/OPEL MAGNETI MARELLI Tool v24 released.  8GMF CAN ECUS with MPC5553 now supported. Download v24

2013 03 06

Tool update FIAT/OPEL MAGNETI MARELLI Tool v23 released.  8DF Kline ECUS with MPC5553 now supported.

2013 02 13

Tool update FIAT/OPEL MAGNETI MARELLI Tool v22 released.   Made some corrections in FIAT Kline 6F3 and 8F2 CAN ECUs soft.

2013 02 12

Tool update FIAT/OPEL MAGNETI MARELLI Tool v21 released.   Made some corrections in FIAT 6F3 and 8F2 ECUs soft.

2013 01 17

Tool update FIAT/OPEL MAGNETI MARELLI Tool v19 released.  Added Fiat ECUs   IAW 5SF3 CAN,Kline Emulated EEPROM R/W.

2012 12 18

Tool update FIAT/OPEL MAGNETI MARELLI Tool v18 released.  Added Fiat ECUs   MJD 8F2,MJD8F3  MPC5565 full flash R/W by CAN.

2012 12 02

Tool update FIAT/OPEL MAGNETI MARELLI Tool v17 released.  Added Fiat ECUs support MJD 8F2,MJD8F3. Current functions eeprom 95640 R/W. Later will add other functions. Changed MJD 6JO,6JF  ECUs MPC555 R/W functions. Now tool can clone MPC555 mcu like it would be done using BDM programmer

2012 11 27

Tool update FIAT/OPEL MAGNETI MARELLI Tool v16 released.  Fixed some bugs related to IAW5SF8,IAW5SF9 ECUS. Changed MJD 6O2,6O3,6F3 ECUs MPC563 R/W functions. Now tool can clone MPC563 mcu like it would be done using BDM programmer

2012 11 27

Tool update FIAT/OPEL MAGNETI MARELLI Tool v15 released.  Added new functions for IAW 5SF8IAW 5SF9 ECUs  Odometer change, Reset(Virgin).

2012 11 21

Tool update FIAT/OPEL MAGNETI MARELLI Tool v13 released.  Added IAW 5SF8, IAW 5SF9 ECUs support by  CAN . Now you can R/W ST10F296 internal flash memory full.

2012 11 16

Tool update FIAT/OPEL MAGNETI MARELLI Tool v10 released.  Fixed some bugs and added FIAT ECU info read function.

 

2012 11 05

Tool update FIAT/OPEL MAGNETI MARELLI Tool v8 released. Added Fiat 6O2,6O3   (Functions  – R/W 95320,MPC563,M58BW016 memories). Screenshot

2012 11 04

Tool update FIAT/OPEL MAGNETI MARELLI Tool v7 released. Added Fiat 6F3 CAN ECUs (Functions  – R/W 95320,MPC563,M58BW016 memories, change mileage,reset). Screenshot

 

I/O TERMINAL Firmware FW_V11 released.

2012 11 04

Tool update FIAT/OPEL MAGNETI MARELLI Tool v6 released. Added Fiat 6F3 CAN ECUs (Functions  – R/W 95320 eeprom, change mileage,reset).

2012 11 01

I/O TERMINAL BASIC V2 software V26 is now aivalable on downloads page.  New version of PSA SID804 there found by one user. Now I/O terminal compatible with that version of ECU. Thanks to Gabriele from http://www.chipmotor.it/

2012 10 31

I/O TERMINAL BASIC V2 software V25 is now aivalable on downloads page. Added support for Land Rover SID201  ecu. Now you can R/W eeprom 95320, R/W external flash M58BW016DB and R/W MPC563 flash. All operations work by CAN.

2012 10 31

Tool update FIAT/OPEL MAGNETI MARELLI Tool v5 released.  Software works with I/O terminal hardware and activated online. For further information contact andrius.stumbrys.ultima@gmail.com

2012 10 25

Tool update FIAT/OPEL MAGNETI MARELLI Tool v4 released.  Opel 6O2 CAN, Fiat 6JF, Fiat 6F3 ECUs now supported. Software works with I/O terminal hardware and activated online. For further information contact andrius.stumbrys.ultima@gmail.com

2012 10 07

Tool for reading/writing memories, reading pincode,changing mileage  of opel magnetti marelli ecus(Z13DT,Z13DTJ,Z13DTH) by OBD or on bench. Software works with I/O terminal hardware and activated online. For further information contact andrius.stumbrys.ultima@gmail.com

2012 09 01

I/O TERMINAL BASIC V2 software V24 is now aivalable on downloads page. Added support for Jaguar SID204  ecu. Now you can R/W eeprom 95320, R/W external flash M58BW016DB and R/W MPC563 flash. All operations work by CAN.

2012 07 02

I/O TERMINAL BASIC V2 software V23 is now aivalable on downloads page. Added support for VAG SIMOS 6.2  ecu. Now you can R/W eeprom 95320, R/W external flash AM29BDD160GB and R/W MPC563 flash. All operations work by CAN.

2012 06 29

I/O TERMINAL BASIC V2 software V22 is now aivalable on downloads page. Added support for VAG SIMOS 7.1, SIMOS 7.1A   ecus. Now you can R/W eeprom 93C86 and R/W external flash 29F400BB. All operations work by Kline. Added Ford,Volvo  SID803,SID803A  mileage correction by CAN.

2012 05 07

New updated software for Renault ECU Tool released v1.03. Added special functions (Clear IMPACT DETECTED,Clear IMMO Code,Read KM) to SID301 ECU software. You can download it on downloads page.  Also you will find there updated user manual and wiring diagrams.

2012 05 04

I/O TERMINAL BASIC V2 software V21 is now aivalable on downloads page. Added support for PSA SID805 and Ford SIM210  ecus. Now you can R/W eeprom 93C56/ 93C86 and R/W external flash 29F400BB. All operations work by CAN.

2012 03 29

New software for Renault ECU Tool released v1.021. You can download it on downloads page.

2012 03 24

I/O TERMINAL BASIC V2 software V19 is now aivalable on downloads page. Added support for Ford SIM22  ecu. Now you can R/W eeprom 93C86 and R/W external flash 29F400BB. All operations work by CAN.

New firmware FW_V09 released for I/O TERMINAL BASIC V2 and RENAULT CAN/K-Line ECU Tool.

2012 03 22

I/O TERMINAL BASIC V2 software V18 is now aivalable on downloads page. Added support for Ford SID804  ecu. Now you can R/W eeprom 93C56 and R/W external flash 29F400BB. All operations work by CAN.

2012 03 21

I/O TERMINAL BASIC V2 software V17 is now aivalable on downloads page. Added support for Ford SID802  ecu. Now you can R/W eeprom 93C56 and R/W external flash 29F400BB. All operations work by CAN.

2012 03 20

I/O TERMINAL BASIC V2 software V16 is now aivalable on downloads page. Added support for Ford SID803,SID803A ecus. Now you can R/W eeprom 95320 and R/W external and internal flash memories. All operations work by CAN.

2012 03 18

I/O TERMINAL BASIC V2 software V15 is now aivalable on downloads page. Corrected Volvo SID803A flash write function.

2012 02 21

New software for Renault ECU Tool released v1.02. You can download it on “Renault CAN/K-line ECU Tool” page.  You can find there user manual and wiring diagrams.  Also all this stuff can be found on downloads page.

2011 10 27

Added support for Volvo SID803,SID803A ecus. Now you can R/W eeprom 95320 and R/W external and internal flash memories. All operations work by CAN.

Comments are closed.